A sample counts as valid when four conditions hold: it represents the batch, it is taken to a defined pattern, its passage from sampling to analysis is recorded, and a witness sample is set aside for a second analysis if the result is challenged. When a laboratory result is disputed, the conversation tends to drift towards instruments and method, yet the real target of the challenge is usually the sample.
When does a sample represent the batch?
Oil drawn from the top of a tank is not the same as oil from the bottom. Density differences, settling and poorly mixed content affect the measurement directly. A carton from the front row of a pallet has not sat in the same conditions as one from the middle either. So a sample is not taken from a single point; how many points, at what depth and in what order are defined in advance. An analysis run before the representation problem is settled ties a correct result to the wrong batch.
What is recorded at the moment of sampling?
- Point and method: how many points, what depth, what order.
- Conditions: temperature, container type, time between sampling and measurement.
- Identity: which batch the sample belongs to. A label stuck on the container is not enough; the link is made to the batch record.
- Container and seal number.
Where does the sample chain break?
Usually in the time between sampling and analysis. Was the container changed, was the temperature held, whose hands did the sample pass through: none of this looks worth recording at the time, and all of it is asked first when a challenge arrives. Handover is done in writing, from whom to whom; storage conditions and duration travel with the sample.
In legal proceedings this record is decisive. If the passage from hand to hand is not recorded, the other side can say "this sample is not our product", and rebutting that becomes difficult.
Why is a witness sample kept?
The result of a first analysis can be challenged. Without a witness sample there is no second measurement to settle it, and the argument moves from what two reports say to how far each party can be trusted. A witness sample taken at the same time, under the same rules, and sealed keeps the argument on technical ground.
How does pre-screening reduce the sampling load?
A quick assessment in the field decides which batch gets sampled. Care then concentrates on a small number of samples. Samples taken properly from a few batches make a stronger file than careless samples from every batch.
In Molevex the sample route is chosen to fit the operation: the organisation can send samples itself, run a pre-screen in the field, or have the team take samples on site. The final result is given in the laboratory and does not replace official sampling procedures.


